Setting Up The Tcc In Chromeleon; Loading The Usb Driver For The Tcc - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

Column compartments
Hide thumbs Also See for Dionex UltiMate 3000 Series:
Table of Contents

Advertisement

3.5 Setting Up the TCC in Chromeleon

This section provides brief instructions for setting up the TCC in Chromeleon. For details,
see the Chromeleon Help. For information about how to set up the TCC in DCMSLink, see
section 3.6 (→ page 44).
Tip: When the TCC is connected to the Chromeleon computer, verify that the
Chromeleon software is installed before turning on the TCC power for the first
time. Only then, the USB driver for the TCC is automatically loaded and the
Windows operating system can detect the TCC when the power is turned on.

3.5.1 Loading the USB Driver for the TCC

1. Turn on the computer power, if it is not already on.
2. Under Windows Vista
on as a
Local administrator if the computer is a local computer.
User with local computer administrator privileges if the computer is a network
computer.
3. Open the Chromeleon Server Monitor program by double-clicking the Chromeleon
Server Monitor icon
If the Server Monitor icon is not on the taskbar, click Start on the taskbar, point to
Programs (or All Programs, depending on the operating system), point to Chromeleon,
and then click Server Monitor.
4. Click Start to start the server.
5. Click Close to close the Server Monitor window. The Server Monitor icon
appears on the taskbar.
Tip: Clicking the Quit Monitor button quits (exits) the Server Monitor program,
but does not stop the server. To stop the server, click Stop.
6. Turn on the main power switch on the rear panel of the TCC.
7. Windows Vista, Windows 7, and Windows Server 2008
will automatically detect the new TCC and perform the USB installation.
If Windows fails to detect the TCC and launches a wizard instead, this indicates that you
connected the TCC to the computer and turned on the power for the first time before you
installed Chromeleon. To resolve the problem:
a) Click Cancel to exit the wizard.
b) Turn off the TCC.
Operating Instructions
TCC-3000SD and TCC-3000RS Column Compartments
®
®
(Windows
XP, Windows
on the Windows taskbar.
UltiMate 3000 Series:
®
®
7, or Windows
Server 2008) log
Page 35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tcc-3000sdTcc-3000rs

Table of Contents