Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 93

To create a standby or shutdown program
Select one of the following alternatives:
• Select and perform the operating commands and parameters from the Commands dialog
box.
• Create and run a corresponding program to automate the process (→ page 65).
• Use the SmartShutdown Wizard to create and run the program (see further down in this
section).
To create the program with the SmartShutdown wizard
1. To open the wizard, click SmartShutdown on the Batch menu.
2. Follow the instructions as they appear on each page of the wizard. For additional
information about a page, click Help.
3. After you finish the wizard, Chromeleon
♦ Creates the program and saves it in the timebase for which you create the program.
♦ Opens the Start Batch on dialog box.
Select the program and click Start to run the program.
For more information about the SmartShutdown wizard, see the Chromeleon Help.
Operating Instructions
TCC-3000SD and TCC-3000RS Column Compartments
UltiMate 3000 Series:
Page 85