Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 47

Module address
•
Select the module address of the TCC if necessary. Click Browse and then double-click
the TCC that you want to use on the Device List. The address is automatically entered in
the Module address box.
Firmware Download
•
Click this button to update the TCC firmware with the version available in Chromeleon.
The button appears dimmed if the Demo Mode is enabled.
The TCC is shipped with the most recent firmware version. If a firmware update is ever
required, follow the steps in section 7.5 (→ page 110).
When you leave the General page during initial installation of the TCC (with the Demo
Mode being disabled), Chromeleon attempts to connect to the TCC, retrieve the settings
from the TCC firmware, and set the options on the corresponding wizard pages. Click OK
to confirm the message.
Components Page
This page shows which components are installed. In addition, you can select the columns for
which to enable column identification.
Operating Instructions
TCC-3000SD and TCC-3000RS Column Compartments
Fig. 11: Components page (here TCC-3000RS)
UltiMate 3000 Series:
Page 39