Service; General Notes And Safety Precautions - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

7 Service

7.1 General Notes and Safety Precautions

The following sections describe all service and repair procedures that the user may
perform. All other maintenance and service procedures must be performed only by Thermo
Fisher Scientific service personnel.
Warning:
Avertissement: Les composants fluidiques de l'instrument peuvent être remplis de
Before starting maintenance or service procedures, observe the following precautions:
• For all service and repair procedures, observe all precautionary statements provided in
these operating instructions.
• Do not touch any metal or plastic parts inside the column chamber while the temperature
is higher than 50 °C. Wait for the chamber to cool down before you carry out any work in
the column chamber.
• Use only the original spare parts authorized for the device by Thermo Fisher Scientific.
• Before returning the TCC for repair, contact Thermo Fisher Scientific Service for Dionex
HPLC Products. An RMA (Return Material Authorization) number is required to track
your instrument. Always use the original packaging and observe the packing instructions
when shipping the TCC. Shipping the TCC in anything other than the original packaging
will void the warranty.
Operating Instructions
TCC-3000SD and TCC-3000RS Column Compartments
The fluid components of the device may be filled with solvents that
are harmful to health. Wear appropriate personal protective
equipment. Rinse the fluid components with an appropriate solvent
to remove harmful substances.
For information about the proper handling of a particular substance
and for advice on specific hazards, refer to the material safety data
sheet for the substance you are using. Observe the guidelines of
Good Laboratory Practice (GLP).
solvants nocifs. Portez l'équipement de protection personnel
approprié. Rincez les composants fluidiques avec un solvant
approprié afin d'éliminer les substances nocives.
Pour les informations sur la manipulation correcte des composés et
des recommandations pour les situations de risque spécifiques,
veuillez consulter la fiche de données de sécurité des substances que
vous utilisez. Veuillez respecter des directives des Bonnes Pratiques
de Laboratoire (BPL).
UltiMate 3000 Series:
Page 95