Technical Information - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

8 Technical Information

Temperature range:
TCC-3000RS
TCC-3000SD
Temperature Accuracy
(Column Chamber):
Temperature Stability
(Column chamber):
Temperature precision
(Column chamber):
Column capacity:
Heat up time (column chamber):
Cool down time (column chamber):
Temperature range
of post-column cooler:
(TCC-3000RS only)
Control:
I/O interfaces:
Column switching valves:
Wetted parts:
Safety features:
User input/display:
Operating Instructions
TCC-3000SD and TCC-3000RS Column Compartments
5 °C to 110 °C, max. 18 °C below ambient
5 °C to 80 °C, max. 18 °C below ambient
±0.5 °C
±0.1 °C
±0.1 °C
Up to 12 columns, depending on the column length
Column length: max. 300 mm
from 20 °C to 50 °C in 12 minutes (typically)
at an ambient temperature of 25 °C
from 50 °C to 20 °C in 15 minutes (typically)
at an ambient temperature of 25 °C
5 °C to 110 °C (settable)
Min. 40 °C below the column chamber temperature (column
temperature: 100 °C, water as eluent, flow rate: 3 mL/min)
All functions software-controlled via USB
2 digital inputs
2 programmable relay outputs
1 or 2 switching valves, depending on the pressure range
2-position, 6-port valve
2-position, 10-port valve
6-position, 7-port valve
Column switching valve (TitanHT: SST, 125 MPa/18,130 psi):
®
SST and Vespel
Column switching valve (TitanHT: SST/Ti, 103 MPa/15000 psi):
SST and PEEK/Ti and PEEK
Column switching valve (TitanHP: SST/Ti, 41 MPa/6000 psi):
SST and Vespel/Ti and Vespel
Column switching valve (TitanHP, PEEK): PEEK
Biocompatible pre-column heater: Fluorinated Sol-Gel-
Nanocomposite
Humidity sensor and gas sensor
Temperature control and temperature sensors
LCD indicating system parameters
Standby button
3 LEDs (Power, Connected, and Status) for status monitoring
4 function keys for operation during initial installation and
maintenance
UltiMate 3000 Series:
Page 113