Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 126

UltiMate 3000 Series:
TCC-3000SD and TCC-3000RS Column Compartments
Column Switching Valves
Pods for
(Cont'd)
Pre-Column heaters
1 µL pre-column heater
SST, with Viper connectors (pressures up to 125 MPa)
2 µL pre-column heater:
SST, with Viper connectors (pressures up to 125 MPa)
Biocompatible (suitable for the pH range 2-10 and pressures up to 34 MPa)
7 µL pre-column heater:
SST, with Viper connectors (pressures up to 125 MPa)
Biocompatible (suitable for the pH range 2-10 and pressures up to 34 MPa)
11 µL pre-column heater:
SST, with Viper connectors (pressures up to 125 MPa)
Biocompatible (suitable for the pH range 2-10 and pressures up to 34 MPa)
Miscellaneous
Drain kit for
UltiMate 3000 systems
The kit includes all required components for system drainage and detailed installation
instructions.
Column clips for columns with an outer diameter of 8-12 mm
Column clip (= pack of 6 clips)
for columns with an outer diameter of 8-12 mm
Signal cable, 6-pin Mini-DIN cable (5 m)
Page 118
TitanHT™ column switching valve,
suitable for pressures < 125 MPa (18130 psi)
6-position, 7-port switching valve (SST)
The rotor seal in the valve pod is suitable for
pH values 0 - 10.
Part No.
6730.0050
Part No.
6722.0510
6722.0530
6723.0232
6722.0540
6723.0242
6722.0550
6723.0252
Part No.
6040.0005
6722.0280
6000.1004
Operating Instructions