Display Screens (Function Keys And Menus); Showing The Function Keys - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

5.4 Display Screens (Function Keys and Menus)

Function keys and menus are available on the front panel display. Thus, you can make
several settings or execute certain commands directly from the TCC.
For information about the function keys, see section 5.4.1 and page 69. For information about
the menus, see section 5.4.2 (→ page 68).

5.4.1 Showing the Function Keys

Four white spots on the front panel mark the positions of four function keys: Menu, Temp,
Valve, and Leak. To show the keys, touch the position of the utmost left spot on the
display with the menu pen.
The function keys replace the information in the bottom line of the status screen. If no key
is selected, the bottom line of the status screen is restored after about 5 seconds.
Compartment
100.0
Menu
To ...
Open the Main menu (→ page 70).
Open the Temperature menu (→ page 70).
Open the Valve menu (→ page 70).
Open the Leak menu (→ page 70).
When the TCC is connected in Chromeleon, front panel input related to the measurement
is disabled to prevent changes to the operating parameters. Parameters that do not interfere
with the measurement, such as the screen brightness or contrast, can still be changed.
Operating Instructions
TCC-3000SD and TCC-3000RS Column Compartments
Fig. 35: Showing the function keys
Switching Valves
°C
10-1
105.0
Temp Valve
Fig. 36: Function Keys
UltiMate 3000 Series:
1-2
Leak
Select ...
Menu
Temp
Valve
Leak
Page 67