Safety; Symbols On The Tcc And In The Manual - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

1.2 Safety

The CE Mark label and cTUVus Mark safety label on the instrument indicate that the
instrument is compliant with the related standards.

1.2.1 Symbols on the TCC and in the Manual

The table shows the symbols that are used on the TCC:
Symbol
˜
At various points throughout the manual, the following symbols indicate messages of
particular importance:
Tip:
Important:
Important:
Operating Instructions
TCC-3000SD and TCC-3000RS Column Compartments
Description
Alternating current—Courant alternatif
Power supply is on (-)—L'instrument est mis sous tension (-) and Power supply
is off (O)—L'instrument est mis hors tension (O)
Surface becomes hot during operation—La surface devient chaude lors du
fonctionnement.
Refer to the Operating Instructions to prevent risk of harm to the operator and to
protect the device against damage.
Référez-vous à ce manuel pour éviter tout risque de blessure à l'opérateur et/ou
protéger l'instrument contre tout dommage.
Label according to the "Measures for Administration of the Pollution Control of
Electronic Information Products" (China RoHS) guideline
Étiquette "Measures for Administration of the Pollution Control of Electronic
Information Products" (China RoHS)
WEEE (Waste Electrical and Electronic Equipment) label—For more
information, see the WEEE Information section in the "Installation and
Qualification Documents for Chromatography Instruments" binder. Étiquette
DEEE (Déchets d'Equipements Electriques et Electroniques)—Pour plus
d'informations, référez-vous au chapitre WEEE Information dans le classeur
"Installation and Qualification Documents for Chromatography Instruments"
Indicates general information, as well as information intended to
optimize the performance of the instrument.
Indicates that failure to take note of the accompanying information
could cause wrong results or may result in damage to the instrument.
Indique que ne pas tenir compte de l'information jointe peut conduire
à de faux résultat ou endommager l'instrument.
UltiMate 3000 Series:
Page 3