Turning On The Device - Thermo Scientific VC-D60 Operating Manual

5.10 Turning On the Device

Refractive Index Detector (VC-D60)
Operating Manual
TIP Before turning on the power to the detector for the first time, verify
that the chromatography software and virtual COM port driver are
installed on the data system computer (see
Software (} page 65)).
To turn on the power to the device, follow these steps:
1. Check that the power button on the front left of the Vanquish
system base (system power button) is pressed in. If the power
button stands out, press the power button to turn on the power on
the system base.
2. Turn on the device with its main power switch.
Turn off the device with the main power switch, when instructed to do
so, for example, during maintenance. Pressing the system power button
will not be sufficient to turn off the power to the device completely.
See also
2 Power On/Off Control (} page 76)
5 • Installation
Setting Up the Device in the
Page 67