Front Panel Elements - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
TCC-3000SD and TCC-3000RS Column Compartments

2.4 Front Panel Elements

3
No. Element
1 Display
2 Standby button
3 Status LEDs
Power
Connected
Status
Page 18
1
2
Fig. 1: Front panel view (example)
Function
Shows information about the TCC, for example:
- General information upon power-up (→ page 59)
- Status screen (→ page 60)
- Functions and menus (→ pages 67 and 68)
- Messages (→ page 88)
Switches the TCC to Standby mode (the LED is lighted).
To cancel Standby mode and resume operation, press the Standby button
again (the LED is not lighted).
Note: To allow the TCC to change the mode, press and hold the Standby
button for at least one second.
The LED is blue when the TCC is on.
The LED is green when the TCC is connected in Chromeleon.
The LED is green when the TCC has reached the target temperature.
The LED is orange when the TCC has not yet reached the target
temperature or when the door is open.
The LED is red when an error has been detected, for example, a leak.
Operating Instructions