Smartstartup And Smartshutdown - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
TCC-3000SD and TCC-3000RS Column Compartments

5.5.8 SmartStartup and SmartShutdown

The SmartStartup wizard assists you in automating regular routine tasks (→ page 57). With
SmartStartup, the different modules of the UltiMate 3000 system are turned on
automatically and in a controlled manner. For example, for the TCC, the column chamber
and all components inside are brought to the preferred temperature. For example,
SmartStartup can purge the pump of the HPLC system automatically, flush the column,
and perform system equilibration. Important module parameters are monitored. When the
modules operate within these limits, the sample sequence, which was set up before, can be
started automatically. SmartStartup can be used at any time.
If you have to interrupt system operation, use the SmartShutdown wizard to create a
program to set the HPLC system into standby mode or to automate shutdown of the system
(→ page 85).
Operating Instructions Page 79