Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 77

Select an item with the arrow up or down key—the selected item is underlined. Confirm
your selection with Select. Back returns you to the previous menu level.
The selected menu item or parameter determines which keys appear on the navigation bar:
To ...
Return to the previous entry on a list.
If the list contains 5 or more items, you can use the arrow up key to scroll up through the
list, after reaching the first line (→ Key autorepeat, page 71).
Increment numerical values.
Select operating states (e.g., the settings for the leak sensor).
Proceed to the next entry on a list.
If the list contains 5 or more items, you can use the arrow down key to scroll up through
the list, after reaching the fourth line (→ Key autorepeat, page 71).
Proceed to the next figure in a number. Any decimal point is skipped.
Confirm the selection and activate the input field if applicable.
If an item is read-only, the Select key will not be available.
Return to the previous menu level.
Toggle between two operating states (for example, between On and Off).
Confirm the selection or input.
Cancel the action and restore the last value.
Note: Depending on the selected option, specific keys may replace these general keys.
If an error is found, one or more messages appear on the TCC display. In this case, the
Prev, Next, and Clear keys appear on the navigation bar.
To ...
Return to the previous message.
Proceed to the next message.
Remove a message from the display.
Operating Instructions
TCC-3000SD and TCC-3000RS Column Compartments
UltiMate 3000 Series:
Select ...
∧
∧
∧ or ∨
∨
>
Select
Back
Toggle
OK
Cancel
Select ...
Prev
Next
Clear
Page 69