Selecting The Status Screen; Adjusting The Screen Brightness Or Contrast - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
TCC-3000SD and TCC-3000RS Column Compartments

5.5.6 Selecting the Status Screen

Only TCC with column switching valves
As an alternative to the status screen in Fig. 31 (→ page 60), you can select this type of
appearance if the instrument is fitted with one or two column switching valves:
Compartment
100.0
Left valve: 10-1
(here TCC-3000RS with two 2-position, 10-port switching valves)
1. Show the function keys and select Menu.
2. Select the Configuration menu and select Display & soft keys (→ page 71).
3. Select Valve display and Small.

5.5.7 Adjusting the Screen Brightness or Contrast

You can adjust the screen brightness or screen contrast to your requirements from
Chromeleon or on the TCC display.
To adjust the settings from Chromeleon
1. In Chromeleon, open the Commands dialog box for the TCC.
2. Select Brightness and change the value for the screen brightness as appropriate.
Select Contrast and change the value for the screen contrast as appropriate.
To adjust the settings on the front panel display
1. Show the function keys and select Menu.
2. Select the Configuration menu and select Display & soft keys (→ page 71).
3. Select Brightness and change the value for the screen brightness as appropriate.
Select Contrast and change the value for the screen contrast as appropriate.
Page 78
Post-Cooler
10
°C
105.0
Fig. 42: Alternative status screen
.
0
°C
8.0
Right valve: 1-2
Operating Instructions