Rotor Seal And Stator Face Seal - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

7.3.4 Rotor Seal and Stator Face Seal

The valve type and the pH value of the application determine the type of seals:
Description
1
Rotor Seal kit for TitanHT™ valves,
for pressures < 41 MPa (6000 psi) and pH values < 10
2-position, 6-port switching valve (SST)
2-position, 10-port switching valve (SST)
6-position, 7-port switching valve (Ti)
Rotor Seal and Stator Face Seal kit
pressures < 41 MPa (6000 psi) and pH values > 10
2-position, 6-port switching valve (SST)*
2-position, 10-port switching valve (SST)*
* Tip: There will be an increase in dead volume with this two-piece
seal.
Rotor Seal and Stator Face Seal kit
valves (PEEK), for pressures < 34 MPa (5000 psi) and pH values 0 - 14
2-position, 6-port switching valve (PEEK)
2-position, 10-port switching valve (PEEK)
1
Rotor Seal kit for TitanHT™ valves,
for pressures < 103 MPa (15000 psi) and pH values 0 - 14
2-position, 6-port switching valve (SST)
2-position, 10-port switching valve (SST)
6-position, 7-port switching valve (SST)
Rotor seal for biocompatible TitanHT™ column switching valves,
suitable for pressures < 103 MPa (15000 psi)
—and—
TitanHT™ column switching valve,
suitable for pressures < 125 MPa (18130 psi)
Replace the valve pod (→ page 100).
1
The kit includes a rotor seal, hexagon wrench, and installation instructions. For information about how to
replace the rotor seal, see section 7.3.4.1.
2
The kit includes a rotor seal, stator face seal, hexagon wrench, and installation instructions. For information
about how to replace the rotor seal and the stator face seal, see section 7.3.4.2 (
Operating Instructions
TCC-3000SD and TCC-3000RS Column Compartments
2
for TitanHP™ valves, for
2
for biocompatible TitanHP™
UltiMate 3000 Series:
Part No.
6722.9012
6722.9022
6722.9032
6722.9014
6722.9024
6722.9014
6722.9024
6730.0007
6730.0027
6730.0017
→
page 108).
Page 107