Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 49

3.5.3.2 Changing the Basic Configuration or Selecting Advanced Settings
You may reopen the configuration settings later again to change the basic configuration
settings or select advanced settings.
1. Start the Server Configuration program (→ page 37).
2. Right-click the TCC in the timebase and click Properties on the menu.
3. In addition to the pages of the installation wizard (→ page 38), configuration pages for
the advanced settings are available (→ page 42). Select the additional settings or
change the settings as needed.
Besides, Chromeleon provides two more buttons on the General page. They allow you to
match the configuration of the TCC with the settings in Chromeleon:
Button
Retrieve configuration
from module
Send configuration
to module
4. To save the configuration, click Save Installation on the File menu and then close the
Server Configuration program.
Operating Instructions
TCC-3000SD and TCC-3000RS Column Compartments
Description
Click this button to transfer the current valve configuration to
Chromeleon. The settings on the Components page are updated.
This is necessary only if you install different column switching
valves or connect a different TCC, or if automatic matching was
not performed correctly when the wizard was started.
Click this button to transfer the valve configuration settings from
the Chromeleon Components page to the TCC.
UltiMate 3000 Series:
Page 41