Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 71

The commands and parameters available in the dialog box vary, depending on the
♦ Chromeleon version
♦ Options selected for the TCC in the Properties dialog (→ page 38).
♦ Display filter level (Normal, Advanced, or Expert)
5. Change the display filter level if necessary. Right-click in the commands list and select
the filter level on the menu.
6. Verify that the TCC is connected to Chromeleon. If it is not, select Connect to
connect the TCC.
For a list of the commands and parameters that are supported for the TCC, see the
Chromeleon Help. In addition to the TCC commands and parameters, the Commands dialog
box provides access to all of the commands and parameters available for all devices that are
installed in the selected timebase.
To open a control panel for the TCC
1. On the View menu, click Default Panel Tabset or click the corresponding icon on the
toolbar , and then connect to the Chromeleon server.
Chromeleon creates centralized control panels, called panel tabsets, for all timebases
available on the Chromeleon server. A panel tabset provides control panels for the
individual instruments in a timebase and, in addition, one or more panels for performing
system-wide functions, for example, creating and running sequences. For more
information about panel tabsets, see the Chromeleon Help.
Operating Instructions
TCC-3000SD and TCC-3000RS Column Compartments
Fig. 32: Command dialog box
UltiMate 3000 Series:
Page 63