Setting Up The Tcc In Dcmslink - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
TCC-3000SD and TCC-3000RS Column Compartments

3.6 Setting Up the TCC in DCMSLink

1. Install and configure the DCMSLink-Software (→ DCMSLink Installation Guide).
The Guide is provided on the DCMSLink DVD in the Additional
Documents\DCMSLink User Documents folder.
2. Open the Chromeleon Server Configuration program (→ DCMSLink Installation
Guide).
3. Add the TCC to a timebase. The steps in section 3.5.2 apply equally (→ page 37).
4. Configure the TCC. The steps in section 3.5.3 apply equally (→ page 38).
For more information about DCMSLink, refer to DCMSLink Help and the DCMSLink
Quick Start Guide. The Quick Start Guide is also provided on the DCMSLink DVD.
Page 44 Operating Instructions