Turn Signal Lever - Mitsubishi MOTORS MIRAGE G4 2022 Owner's Manual

Turn signal lever

3. Within 60 seconds of turning the ignition
switch to the "OFF" position or putting
the operation mode in OFF, pull the turn
signal lever toward you.
5
4. The headlights will come on in the low
beam setting for approximately 30 sec-
onds. After the headlights go off, the
headlights can be turned on again in the
low beam setting for approximately
30 seconds by pulling the turn signal lever
toward you within 60 seconds of turning
the ignition switch to the "OFF" position
or putting the operation mode in OFF.
To turn on the headlights again after 60
seconds of turning the ignition switch to
the "OFF" position or putting the opera-
tion mode in OFF, repeat the process from
step 1.
5-98 Features and controls
NOTE
 While the coming home light function is
operating, perform one of the following
operations to cancel the function.
• Pull the turn signal lever toward you.
• Turn the combination headlights and dim-
mer switch to the " " or "
• Turn the ignition switch to the "ON" posi-
tion or put the operation mode in ON.
 It is possible to modify functions as follows:
• The time that the headlights remain on can
be changed.
• The coming home light function can be
deactivated.
For details, consult an authorized Mitsubishi
Motors dealer.
Turn signal lever
When changing lanes, or to making a gradual
turn, hold the lever in the "lane change" posi-
tion (1). It will return to the neutral position
when you let go. Use the full position (2)
when making a normal turn. The lever will
return to the neutral position when the turn is
complete. There may be times when the lever
does not return to the neutral position. This
usually happens when the steering wheel is
turned only slightly. You can easily return the
lever by hand.
Also, when you move the lever to (1) slightly
then release it, the turn signal lights and the
indicator light in the instrument cluster will
flash three times.
" position.
NOTE
 A light in the instrument panel flashes to
show when the turn signal lights are working
properly.
N00522601662
If this light flashes faster than usual, check
for a burned out turn signal light bulb or mal-
functioning connection in the signal.
If the panel light does not come on when the
lever is moved, check for a blown fuse or a
burned out bulb in the panel.
Have the system inspected by your autho-
rized Mitsubishi Motors dealer or a repair
facility of your choice.
 It is possible to modify functions as follows:
• Deactivate the turn signal light 3-flash
function for lane changes.