Cruise Control (If So Equipped) - Mitsubishi MOTORS Outlander 2019 Owner's Manual

Cruise control (if so equipped)

Cruise control
(if so equipped)
Cruise control is an automatic speed control
system that keeps a set speed. It can be acti-
vated at speeds from approximately 25 mph
(40 km/h). Cruise control does not work at
5
speeds below approximately
(40 km/h).
CAUTION
 When you do not wish to drive at a set speed,
turn off the cruise control for safety.
 Do not use cruise control when driving con-
ditions will not allow you to stay at the same
speed, such as in heavy traffic or on roads
that are winding, icy, snow-covered, wet,
slippery, on a steep downhill slope.
NOTE
 Cruise control may not be able to keep your
speed on uphills or downhills.
 Your speed may decrease on a steep uphill.
You may use the accelerator pedal if you
want to stay at your set speed.
 Your speed may increase to more than the set
speed on a steep downhill. You have to use
the brake to control your speed. As a result,
the set speed driving is deactivated.
5-102 Features and controls
Cruise control switches
N00518301671
25 mph
A- CRUISE CONTROL ON/OFF switch
Used to turn on and off the cruise control.
B- "SET -" switch
Used to reduce the set speed and to set the
desired speed.
C- "RES +" switch
Used to increase the set speed and to return to
the original set speed.
D- "CANCEL" switch
Used to deactivate the set speed driving.
NOTE
 When operating the cruise control switches,
press the cruise control switches correctly.
The set speed driving may be deactivated
automatically if two or more switches of the
cruise control are pressed at the same time.
To activate
1. With the operation mode in ON, press the
CRUISE CONTROL ON/OFF switch (A)
to turn on the cruise control. The indica-
tor/indicator display in the meter cluster
will come on.
Indicator
Indicator display
N00518401470