2. With the Mitsubishi mark facing you,
insert the cloth-covered tip of a flat blade
screwdriver into the notch in the remote
control transmitter case and use it to open
the case.
NOTE
Be sure to perform the procedure with the
Mitsubishi mark facing you. If the Mitsubi-
shi mark is not facing you when you open the
remote control transmitter case, the buttons
may come out.
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
3. Remove the remote control transmitter
from the remote control transmitter case.
Then, open the remote control transmitter
using the method described in step 2.
4. Remove the old battery.
5. Install a new battery with the + side (A)
down.
+ side
- side
Coin type battery
CR1620
6. Close the remote control transmitter
firmly.
7. Place the remote control transmitter in the
remote control transmitter case, then
securely close the remote control trans-
mitter case.
8. Check the keyless entry system to see that
it works.
NOTE
You may purchase a replacement battery at
an electric appliance store.
An authorized Mitsubishi Motors dealer can
replace the battery for you if you prefer.
CAUTION
When the remote control transmitter case is
opened, be careful to keep water, dust, etc.
out. Also, do not touch the internal compo-
nents.
Free-hand Advanced Secu-
rity Transmitter (F.A.S.T.-
key)
(if so equipped)
The Free-hand Advanced Security Transmit-
ter (F.A.S.T.-key) enables the doors to be
locked and unlocked, the trunk lid to be
opened, and the engine to be started simply
by carrying it.
Features and controls
5
N00503100108
5-11