C H A P T E R 2 Overview: Cisco Asr 1000 Series Aggregation Services Routers Sips - Cisco ASR-1000-SIP10 Hardware Installation Manual

Asr 1000 series aggregation services routers sip and spa
Table of Contents

Advertisement

SPA Interface Addresses on SIPs
Access to this tool is limited to users with Cisco.com login accounts.
Note
To access Software Advisor, click Login at Cisco.com, type "Software Advisor" in the SEARCH box,
and click GO. Click the link for the Software Advisor tool.
Choose a product family or enter a specific product number to search for the minimum supported
software release needed for your hardware.
SPA Interface Addresses on SIPs
Interface addresses specify the physical location of each interface on a router or switch.
describes how to identify the interface addresses for SPAs supported on the SIPs.
Table 2-2
SPA Interface Addresses
SIP
Cisco ASR 1000 Series SIP
Identifying Slots and Subslots for SIPs and SPAs
This section describes how to specify the physical locations of a SIP and SPA on the Cisco ASR 1000
Series Routers within the command-line interface (CLI) to configure or monitor the devices.
Specifying the Slot Location for a SIP
The Cisco ASR 1000 Series Routers support different chassis models, each of which supports a certain
number of chassis slots.
Figure 2-1
chassis slots for SIPs, and can accommodate a total of twelve SPAs.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
2-2
Address Format
router-module-slot/SIP-subslot/SPA-port-number
The Cisco ASR 1006 Router supports three chassis slots for SIPs.
The Cisco ASR 1004 Router supports two chassis slots for SIPs.
The Cisco ASR 1002 Router supports one chassis slot for a SIP that is permanently installed, and
the integrated Route Processor and Gigabit Ethernet ports reside in SPA subslot 0.
shows an example of a SIP installed on a Cisco ASR 1006 Router. The router has three
Chapter 2
Overview: Cisco ASR 1000 Series Aggregation Services Routers SIPs
Description
Router module slot—0 through 2
SIP subslot—0 through 3
SPA port number—0 through x
Note
Table 2-2
The maximum number of SPA
ports depends on the type of
SPA.
OL-14126-03

Advertisement

Table of Contents
loading

Table of Contents