Cable-Management System - Cisco 12404 Installation And Configuration Manual

Cable-Management System

Cable-Management System

Caution
Cisco 12404 Internet Router Installation and Configuration Guide
1-30
The Cisco 12404 Internet router is set up with two types of cable-management
systems:
Line card cable-management bracket
•
card and routes the line card cables to the chassis cable management bracket.
These brackets keep the cables free of sharp bends and out of the way.
• Chassis cable-management bracket
and routes the line card cables away from the chassis.
Cable-management systems:
Organize the interface cables on the line cards, RP, and clock and scheduler
•
cards as they enter and exit the system.
Consists of two parts, a card cable-management bracket and a chassis
•
cable-management bracket.
Excessive bending in an interface cable can cause performance degradation.
Figure 1-15 RP and Line Card Cable-Management Bracket
Chapter 1
(Figure 1-15)—Attached to each line
(Figure 1-16)—Attached to the chassis
For fiber-optic or
copper cable
line cards
Product Overview
OL-11636-01