Omron NX-SL3300 User Manual page 271

Drop point
Input terminal
Output terminal
Before the output param-
eter
l Example 1 of a Dragged Output Parameter Object
When an output parameter is added to the output terminal, the network is as shown below.
l Example 2 of a Dragged Output Parameter Object
When an output parameter is added before another output parameter, the network is as shown be-
low.
The output parameter is inserted on a branch that is created before the output variable.
Deleting Output Parameters
NX-series Safety Control Unit User's Manual (Z930)
Position where function block is added
The output parameter is inserted on a branch that is created before the input ter-
minal.
The output parameter is inserted after the output terminal.
The output parameter is inserted on a branch that is created before the output
variable.
6 Programming
6
6 - 55