Omron NX-SL3300 User Manual page 179

7
Perform steps 3 and 4 to add another EtherCAT Coupler Unit.
8
Or, perform step 5 for the EtherCAT Coupler Unit that was added to display the Slave Terminal
Tab Page.
9
Select Safety Digital Input Device or Safety Digital Output Device from the Groups List in
the Toolbox. The Safety I/O Unit is displayed below it. Drag the model of the Safety I/O Unit to
the Slave Terminal and add it to the configuration.
This completes the creation of the Controller configuration for an NJ/NX-series CPU Unit that includes
Safety Control Units.
After the Safety CPU Unit is added to the NJ/NX-series Controller configuration, the Safety CPU Unit
will be displayed in the Controller Selection Box in the Multiview Explorer. The Safety CPU Unit that
was added is displayed below the NJ/NX-series Controller (i.e., the EtherCAT master).
NX-series Safety Control Unit User's Manual (Z930)
5 System Configuration and Setup
Drag & Drop
Drag & Drop
Click
5
Click
5 - 7