Omron NX-SL3300 User Manual page 273

Method
Method 2 Select the Jump label and press the Delete Key.
Editing Jump Labels
Use the following procedure to edit jump labels.
Select a jump label on the network and edit it.
• The jump label becomes editable when you click it. After you finish editing, press the Enter key.
a) After the jump label is selected, the network is as shown below.
b) After the jump label is edited, the network is as shown below.
Inserting Jump Instructions
Use one of the following procedures to insert a Jump instruction in a network.
Method
Method 1 Drag Jump from General in the Toolbox to the words Start here on a new network.
Method 2 Right-click the FBD network and select Insert Jump from the menu.
The Jump instruction is inserted in the network.
• Before the Jump instruction is dropped, the network is as shown below.
• After the Jump instruction is inserted, the network is as shown below.
NX-series Safety Control Unit User's Manual (Z930)
Operation
Operation
6 Programming
6
6 - 57