Table of Contents
Advertisement
7 Checking Operation and Actual Operation
Let-
ter
(b)
Test Condition
(c)
Input Settings
(d)
Output Settings
7 - 42
Name
Export – CSV File Output
Export – Export to Auto-
matic Programming
Export – Export to Simple
Automatic Test
Export – Export to Online
Functional Test
Specify a variable assigned to the reset switch of the safety system. You
can set any SAFEBOOL or BOOL variable that is defined in the global vari-
able table.
You will use the reset switch when you check the manual reset operation.
Specify a variable assigned to the safety input device used in the online
functional test.
In addition to the variable name of the input device, specify a reset type and
an input type as well.
Variable
Reset Type
Input Type
Specify a variable assigned to the safety output device used for the online
functional test.
You can set any SAFEBOOL or BOOL variable that is defined in the global
variable table.
Function
Exports the current online functional test set-
tings to a CSV file.
Exports the current online functional test set-
tings to the automatic programming settings.
The settings of the export destination are over-
written.
Exports the current online functional test set-
tings to the simple automatic test settings.
The settings of the export destination are over-
written.
Exports the current automatic programming
settings to the online functional test settings.
The settings of the export destination are over-
written.
Specify a variable name assigned to the safety
input device of the safety system.
You can specify the SAFEBOOL or BOOL-type
variable for the variable name.
Selects a reset type of the safety input device
from the box.
The default value of the reset type is Manual.
•
Manual
If manual reset is used for the input device, a
test is executed for the manual reset scenar-
io that uses the reset signal set in the Test
Condition.
•
Auto
If automatic reset is specified for the input
device, a test is executed according to the
auto reset scenario.
To set a test for two input signals, such as for a
safety door or two-hand switches, set the input
type to 2 Inputs.
If you set the input type to 2 inputs, a row is
added to specify another variable.
NX-series Safety Control Unit User's Manual (Z930)
Advertisement
Table of Contents
Troubleshooting
