Omron NX-SL3300 User Manual page 72

2 Specifications
Installation orientation and restrictions
*1. The cable length for the Units that supply power to the corresponding Unit must be up to 20 m.
*2. Only NX102 CPU Units can be connected. NX1P2 CPU Units cannot be connected.
l NX-SL5500
Maximum number of safety I/O points
Program capacity
Number of safety I/O connections
Number of CIP Safety originator con-
nections
Number of CIP Safety target connec-
tions
Number of originators that can be
connected with a multi-cast connec-
tion
Number of FSoE master connections
I/O refreshing method
External connection terminals
Indicators
Hardware switch settings
Dimensions (mm)
I/O power supply method
2 - 6
Item
Item
1,024 points
2,048 KB
128
128
4
8
128
Free-Run refreshing
None
[TS] indicator, [NS] indicator, [FS] indicator, [P ERR] indicator, [RUN]
indicator, [VALID] indicator, [DEBUG] indicator, seven-segment indi-
cator
[TS] LED, [NS] LED, [FS] LED
[P ERR] LED, [RUN] LED,
[VALID] LED, [DEBUG] LED
[SERVICE] switch, [SETTING] switch
30 × 100 × 71 mm (W × H × D)
Not supplied.
Specification
Installation orientation:
•
Connected to a CPU Unit
Possible in the upright installation orientation.
•
Connected to a Communications Coupler Unit
Six possible orientations.
Restriction: None.
Specification
Seven-segment indicator
NX-series Safety Control Unit User's Manual (Z930)
*2