Omron NX-SL3300 User Manual page 291

The Automatic Programming Settings Tab Page is displayed.
2
Set Basic Settings, Input Settings, Output Settings, and Expected Value Settings.
3
On the operation panel of the Automatic Programming Settings Tab Page, click the Generate
Button.
Once a program is generated, the following dialog is displayed.
4
Click the OK Button.
Once a program is generated, a safety program generated based on the settings and a func-
tion block (OC_ResetSignal) used to identify the reset signal are added to the project.
NX-series Safety Control Unit User's Manual (Z930)
6 Programming
6
6 - 75