Omron NX-SL3300 User Manual page 596

Appendices
General
Status
(hex)
01 011D
01 011E
01 011F
01 0120
01 0121
01 0122
01 0123
01 0124
01 0125
01 0126
01 0127
01 0128
01 0129
01 012A
01 012B
01 012C
01 012D
01 012E
01 012F
01 0130
01 0131
01 0132
01 0133
01 0134
01 0135
01 0136
01 0137
01 0138
01 0139
01 0203
01 0204
01 0205
01 0206
01 0207
01 0301
01 0302
01 0303
01 0304
01 0305
01 0306
01 0311
01 0312
01 0315
01 0316
A - 84
Additional
Status
(hex)
T->O Production Trigger not supported
Direction not supported
Invalid originator to target Network Connection Fixvar
Invalid target to originator Network Connection Fixvar
Invalid originator to target Network Connection Priority
Invalid target to originator Network Connection Priority
Invalid originator to target Network Connection Type
Invalid target to originator Network Connection Type
Invalid originator to target Network Connection Redundant_Owner
Invalid configuration size
Invalid originator to target Network Connection Size
Invalid target to originator Network Connection Size
Invalid Configuration Application Path
Invalid Consuming Application Path
Invalid Producing Application Path
Configuration Symbol does not exist
Consuming Symbol does not exist
Producing Symbol does not exist
Inconsistent Application Path combination
Inconsistent Consume Data Format
Inconsistent Produce Data Format
Null Forward Open function not supported
Connection Timeout Multiplier not acceptable
Mismatched T->O Network Connection Size
Mismatched T->O Network Connection Fixvar
Mismatched T->O Network Connection Priority
Mismatched Transport Class
Mismatched T->O Production Trigger
Mismatched T->O Production Inhibit Time Segment
Connection cannot be closed because the connection has timed out.
Unconnected_Send service timed out while waiting for a response.
Parameter Error in Unconnected Send Service or Parameter Error in SafetyOpen
or SafetyClose
Message too large for unconnected message service.
Unconnected acknowledgement without reply.
No buffer memory available.
Network bandwidth not available for data.
No tag filters available.
Not configured to send real-time data.
Schedule Signature mismatch
Schedule Signature validation not possible
Port that was specified in port segment is not available.
Link address that was specified in port segment is not available.
Invalid segment type or segment value in path.
Path and connection were not equal when closing the connection.
Explanation
NX-series Safety Control Unit User's Manual (Z930)