Omron NX-SL3300 User Manual page 274

Nx series safety control unit

Hide thumbs Also See for NX-SL3300:

Table of Contents

6 Programming

Deleting Jump Instructions

Use one of the following procedures to delete a Jump instruction.

Method 1 Right-click the Jump Instruction select Delete from the menu.

Method 2 Select the Jump Instruction and press the Delete Key.

The selected Jump instruction is deleted.

Inserting Return Instructions

Use one of the following procedures to insert a Return instruction in a network.

Method 1 Drag Return from General in the Toolbox to a terminal in the FBD editor, or to a new FBD network

where the words Start here are displayed.

Method 2 Right-click the FBD network and select Insert Return from the menu.

The Return instruction is inserted in the network.

• After you insert a return instruction, the network is laid out as shown below.

Deleting Return Instructions

Use one of the following procedures to delete a Return instruction.

Method 1 Right-click the Return instruction and select Delete from the menu.

Method 2 Select the Return instruction and press the Delete Key.

NX-series Safety Control Unit User's Manual (Z930)

Troubleshooting