Omron NX-SL3300 User Manual page 102

2 Specifications
Letter
(A) Marker attachment loca-
tion
(B) NX bus connector
(C) Unit hookup guides
(D) DIN Track mounting
hook
(E) Protrusions for removing
the Unit
(F) Indicators
(G) Terminal block
(H) Unit specifications
Terminal Blocks
There are two models of screwless clamping terminal blocks: NX-TB£££2 and NX-TB£££1. The
following models of Terminal Blocks can be mounted to Safety Output Units.
NX-TB£££2
(A)
A1
A2
A3
A4
A5
A6
A7
A8
8-terminal type
NX-TB£££1
2 - 36
Name
The locations where markers are attached. The markers made by OMRON
are installed for the factory setting. Commercially available markers can also
be installed.
Refer to 3-1-2 Attaching Markers on page 3 - 4.
This is the NX-series bus connector.
These guides are used to connect two Units.
This hook is used to mount the NX Unit to a DIN Track.
The protrusions to hold when removing the Unit.
The indicators show the current operating status of the Safety Output Unit or
signal I/O status.
Refer to 2-3-3 Indicators on page 2 - 38.
The terminal block is used to connect external devices.
The specifications of the Safety Output Unit are given.
(B)
B1
(C)
B2
B3
B4
B5
B6
B7
B8
Function
NX-series Safety Control Unit User's Manual (Z930)