Omron NX-SL3300 User Manual page 353

Nx series safety control unit

Hide thumbs Also See for NX-SL3300:

Table of Contents

• Reset Type: Auto

The Controller checks if the variables assigned to all the output devices are set to TRUE

when detecting that the specified variables are set to TRUE. The test result appears in the

dialog shown below. If the devices operate normally as specified in the expected value set-

tings, select the checkbox stating The device operates normally and then select OK.

Operate the device as instructed on the screen. Execute a function reset.

It is displayed for manual reset only.

The window shows instructions to reset the function, which will allow you to confirm that the

tested input device is normally restored. Operate the reset switch as instructed on the screen

and change the variable assigned to the reset switch from FALSE to TRUE and then FALSE

NX-series Safety Control Unit User's Manual (Z930)

7 Checking Operation and Actual Operation

Troubleshooting