7 Checking Operation and Actual Operation
Description of Monitor Tab Page
• NX Bus Master Displays
This section describes for the Communications Coupler Unit as an example.
Display
• NX Unit Displays
7 - 22
Monitor
function
Enabled
The NX bus master is present in the actual configuration and
communications are established with it.
Disabled
The Communications Coupler Unit is disabled in the Ether-
CAT network configuration.
Safety I/O Units connected to this Communications Coupler
Unit are not monitored.
Disabled
Either the NX bus master is not present in the actual configu-
ration or communications cannot be established with it.
Safety I/O Units connected to this NX bus master are not
monitored.
NX-series Safety Control Unit User's Manual (Z930)
Description