Table of Contents
Advertisement
Safety Precautions
Transferring
Always confirm safety at the destination before you transfer the unit configuration infor-
mation, parameters, set values, or other data from tools such as the Sysmac Studio.
The devices or machines may perform unexpected operation regardless of the operat-
ing mode of the Controller.
Restoring Data
When you restore the Safety CPU Unit, confirm that the safety signature for the re-
stored programs is correct. Serious injury may possibly occur due to loss of required
safety functions.
23
NX-series Safety Control Unit User's Manual (Z930)
Advertisement
Table of Contents
Troubleshooting
