Omron NX-SL3300 User Manual page 301

The setting areas of the Simple Automatic Test are configured as described in the following table.
Item Name
(a) Simple
Auto-
matic
Test Op-
eration
Panel
(b) Test
Condi-
tion
Area
(c) Input
Setting
Area
NX-series Safety Control Unit User's Manual (Z930)
(a)
(b)
(c)
(d)
(e)
The operation panel is used to make settings for and execute the Simple Automatic Test. You
can perform the following operations.
Run Button
Test Result Button
Register Variables Button
Initial Value Settings Button Displays the Initial Value Settings Dialog Box.
Feedback Settings Button
Import Button
Export Button
Select the variable to use as a reset signal for the safety program. You can set any SAFE-
BOOL or BOOL variable that is defined in the global variable table.
Set the variables of the input signals to use in the Simple Automatic Test.
In addition to the variable name, set the reset types and input types of the input signals.
Function
Executes the Simple Automatic Test.
Shows the previous test results for the Simple Automatic Test.
Used to register the variables that are used for the Simple Au-
tomatic Test.
Displays the Feedback Settings Dialog Box.
Imports the settings for a Simple Automatic Test from a CSV
file. If you import the settings, the current settings are overwrit-
ten.
Exports the current settings for the Simple Automatic Test to a
CSV file.
6 Programming
6
6 - 85