Omron NX-SL3300 User Manual page 69

Operating environment Ambient operating tem-
Installation method
Individual Specifications
This section provides the individual specifications of the Safety CPU Unit.
l Datasheet Items for Safety CPU Unit
The following table gives the meaning of the datasheet items for the Safety CPU Unit.
Item
Maximum number of safety
I/O points
Program capacity
Number of safety I/O connec-
*1
tions
Number of CIP Safety origi-
nator connections
Number of CIP Safety target
*2
connections
Number of originators that
can be connected with a mul-
ti-cast connection
Number of FSoE master con-
nections
I/O refreshing method
NX-series Safety Control Unit User's Manual (Z930)
Item
perature
Ambient operating hu-
midity
Atmosphere
Ambient storage temper-
ature
Altitude
Pollution degree
Noise immunity
Insulation class
Overvoltage category
EMC immunity level
Vibration resistance
Shock resistance
This is the number of safety I/O points that Safety CPU Unit can control.
This is the capacity of the safety programs in the Unit.
This is the maximum number of Safety I/O connections that can be set to this
Unit. The value is the total number of CIP Safety originator connections, CIP
Safety target connections, and FSoE master connections.
This is the maximum number of CIP Safety originator connections that can be
set to this Unit.
*2
This is the maximum number of CIP Safety target connections that can be set
to this Unit.
When this unit is a CIP Safety target, it is the number of CIP Safety origina-
tors that can be connected with a multi-cast connection by a single CIP Safe-
ty target connection.
It is the maximum number of FSoE master connections that can be config-
ured to this unit.
The I/O refreshing methods that are used by the Unit.
Specification
0 to 55°C
10% to 95% (with no condensation or icing)
Must be free from corrosive gases.
−25 to 70°C (with no condensation or icing)
2,000 m max.
Pollution degree 2 or less: Conforms to JIS B 3502
and IEC 61131-2
Conforms to IEC 61131-2, 2 kV (power supply line)
CLASS III (SELV)
Category II: Conforms to JIS B 3502 and IEC 61131-2
Zone B
Conforms to IEC 60068-2-6
5 to 8.4 Hz with amplitude of 3.5 mm
8.4 to 150 Hz, acceleration of 9.8 m/s
100 min. in each X, Y, and Z directions (10 sweeps of
10 min. each = 100 min. total)
Conforms to IEC 60068-2-27
2
147 m/s , 3 times in each X, Y, and Z directions
DIN Track (IEC 60715 TH35-7.5/TH35-15)
Description
2 Specifications
2
2
2 - 3