Omron NX-SL3300 User Manual page 127

Lock lever
Terminal block
Attaching a Terminal Block
1
Mount the terminal block hook that is applicable to each Unit model on the guide at the bottom
of the NX Unit, lift up the terminal block, and press in on the top of the terminal block until you
hear it engage.
The terminal block will click into place on the Unit. After you mount the terminal block, make
sure that it is locked to the Unit.
Mount a Terminal Block that is applicable to the model of each Unit.
Refer to Applicable Terminal Blocks for Each Unit Model ( page 2 - 24, page 2 - 37) for the applicable
Terminal Blocks.
NX-series Safety Control Unit User's Manual (Z930)
Hook Guide
3 Installation and Wiring
3 - 19
3