Omron NX-SL3300 User Manual page 272

6 Programming
Use the following procedure to delete output parameters.
Right-click the Output parameters on the FBD network and select Delete from the menu.
The selected output parameter is deleted. You cannot select multiple variables.
Editing Output Parameters
Use one of the following procedures to edit output parameters.
If you specify a variable name that does not exist in the local variable table, that variable will be regis-
tered as a local variable.
Select the output variable on the FBD network and directly enter the variable name.
Before the output variable is edited, the network is as shown below.
• If you prefer to enter the variable name directly, a list of variable names that you can select from is
displayed when you begin entering the variable name.
• To create a new output variable, enter the variable name and press the Enter Key. The output varia-
ble is registered, and it is also registered as a local variable in the local variable table.
Inserting Jump Labels
Use the following procedure to insert jump labels into an FBD network.
Right-click the FBD network and select Insert Jump Label from the menu.
After the jump label is added, the network is as shown below.
You cannot add another jump label to a network if it already has one.
Deleting Jump Labels
Use one of the following procedure to delete jump labels.
Method
Method 1 Right-click the Jump label and select Delete from the menu.
6 - 56
Operation
NX-series Safety Control Unit User's Manual (Z930)