Snmp Host Table Settings - D-Link Dis-200G Series Web Ui Reference Manual

Parameter
User Name
Group Name
SNMP Version
SNMP V3 Encryption
Auth-Protocol
Priv-Protocol
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.

SNMP Host Table Settings

This window is used to configure and display the recipient of the SNMP notification.
To view the following window, click Management > SNMP > SNMP Host Table Settings, as shown
below:
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
Description
Enter an alphanumeric string of up to 32 characters. This is used to
identify the SNMP users.
Enter the SNMP group name to which the user belongs. The syntax
is general string that does not allow spaces.
Select the SNMP version. Options to choose from are v1, v2c, and
v3.
When selecting v3 in the SNMP Version drop-down list, this option is
available. Options to choose from are None, Password, and
Key.
When selecting v3 in the SNMP Version drop-down list, and
selecting either Password or Key in the SNMP V3 Encryption drop-
down list, this option is available. Select the authentication level.
Options to choose from are MD5, and SHA.
MD5 - Select to use the HMAC-MD5-96 authentication level. This
field will require the user to enter a password or a key.
SHA - Specify that the HMAC-SHA authentication protocol will be
used. This field will require the user to enter a password or a key.
When selecting v3 in the SNMP Version drop-down list, and
selecting either Password or Key in the SNMP V3 Encryption drop-
down list, this option is available. Select the private protocol.
Options to choose from are None, and DES56.
None - Specify that no authorization protocol is in use.
DES56 - Specify that DES 56-bit encryption is in use, based on the
CBC-DES (DES-56) standard. This field will require the user to enter
a password or a key.
Figure 5-9 SNMP Host Table Settings
40