Igmp Snooping Multicast Vlan Settings - D-Link DAS-3626 User Manual

IGMP Snooping Multicast VLAN Settings

This window is used to configure the IGMP Snooping Multicast VLAN settings on the switch.
To view this window, click Switch Configuration > IGMP Snooping > IGMP Snooping Multicast VLAN Settings as
shown below:
The following fields can be set
Parameter Description
VLAN Name This is the VLAN Name that, along with the VLAN ID, identifies the VLAN the user wishes to
modify the IGMP Snooping Settings for.
VID (2-4094) This is the VLAN ID that, along with the VLAN Name, identifies the VLAN the user wishes to
modify the IGMP Snooping Settings for.
State Use the drop-down menu to toggle between Enabled and Disabled.
Replace Source IP Enter an IP address that new IP address to be used.
Member Port Select the ports that will be members of the Multicast VLAN. (Eg. Ports 1 to 4 and port 6)
(e.g.:1-4,6)
Source Port Select the source Port for the Multicast VLAN.
(e.g.:1-4,6)
Tagged Member Select the ports that will be tagged as members of the VLAN.
Port (e.g.:1-4,6)
To modify an entry click the corresponding Modify, To edit and entry click the corresponding Edit button and to delete
an entry click the corresponding Delete button.
DAS-3626 VDSL2 Switch User Manual
Figure 70.IGMP Snooping Multicast VLAN Settings menu
64