Front Panel Keys And Connections - Keysight EPM Series Installation Manual

Front Panel Keys and Connections

This section briefly describes the functions of the front panel keys and connectors.
The user's guide shows you how to use them in more detail.
These keys are located to the left of the display.
Key
Keysight N1913/1914A Installation Guide
Function
Press this key to preset the power-meter to the default setting.
Press this key to control the power meter from the front panel when it is operating
via the remote interfaces (when Local Lock Out is not enabled).
Press this key to select the upper or lower measurement window. The selected
window is highlighted by a blue line on the right side of the window. Any
measurement setup you create is performed in the selected window.
Press this key to choose windowed, expanded, or full-screen display of a numeric
measurement. It also provides quick access to the Gate Control screen and menu
when a trace window is selected.
Press this key to switch the meter between on and standby. When power is
supplied, the background LED is red. Pressing the key, switches the power meter
on and the background LED is green. When the meter is powered on, the start-up
will take approximately 25 seconds.
Getting Started
29
1