1
Getting Started
Front Panel Keys and Connections
This section briefly describes the functions of the front panel keys and connectors.
The user's guide shows you how to use them in more detail.
These keys are located to the left of the display.
Key
22
Function
Press this key to switch the meter between on and standby.
When power is supplied, the orange LED above the key is lit.
Press the key to switch the meter on. The green LED lights.
Press this key to select the measurement window or the
individual measurement display lines. Any measurement
setup you create is implemented in the selected
measurement.
Press this key to choose windowed, expanded, or full-screen
display.
Press this key to preset the power-meter when it is operating
Pres
in local mode (front panel operation). A pop-up-window is
Local
displayed asking you to confirm the command. It also enables
you to take control of the meter from the front panel when
operating via the remote interfaces (when Local Lock Out is
not enabled).
Keysight E4416A and E4417A Installation Guide