Basic Operator Panel 20 (Bop20); Operation With Bop20 (Basic Operator Panel 20); General Information About The Bop20 - Siemens Sinamics s120 Commissioning Manual

Commissioning

3.22 Basic Operator Panel 20 (BOP20)

3.22 Basic Operator Panel 20 (BOP20)
Brief description
The Basic Operator Panel 20 (BOP20) has six keys and a two-line display unit with
background lighting. The BOP20 can be plugged onto the SINAMICS Control Unit and
operated.
Image 3-98
The BOP20 supports the following functions:
● Input and changing parameters
● Display of operating modes, parameters and alarms
● Display and acknowledgment of faults
● Powering-up/powering-down while commissioning
● Simulation of a motorized potentiometer
3.22.1

Operation with BOP20 (Basic Operator Panel 20)

3.22.1.1

General information about the BOP20

The BOP20 can be used to switch on and switch off drives during the commissioning phase
as well as to display and modify parameters. Faults can be diagnosed as well as
acknowledged.
The BOP20 is snapped onto the Control Unit. To do this, the blanking cover must be
removed (for additional information on mounting, please refer to the SINAMICS S120
Manual Control Units and Supplementary System Components).
292
BOP20
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5