Topology Example: Drives In U/F Control (Vector Control) - Siemens Sinamics s120 Commissioning Manual

Preparation for commissioning
2.6 Supported sample topologies
2.6.5

Topology example: Drives in U/f control (vector control)

The following diagram shows the maximum number of controllable vector V/f drives with
additional components. The sampling times of individual system components are:
● Active Line Module: p0115[0] = 250 µs
● Motor Modules: p0115[0] = 500 µs
● Terminal Module/Terminal Board p4099 = 2 ms
Image 2-11 Topology example of a vector drive line-up in U/f control
74
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5