Commissioning U/F Vector Control Booksize Format For The First Time; Task - Siemens Sinamics s120 Commissioning Manual

3.6

Commissioning U/f vector control booksize format for the first time

An example provided in this chapter explains all the configuration and parameter settings, as
well as tests that are required for initial commissioning. Commissioning is carried out using
the STARTER commissioning tool.
Preconditions for commissioning
● The commissioning preconditions (Page 30) have been met.
● The commissioning checklists (Page 32) (Tables 2-1 and 2-2) have been completed and
the points fulfilled.
● The STARTER commissioning tool is installed and activated.
– System prerequisites, refer to the Readme file in the STARTER installation directory.
● The drive system has been wired according to the specifications.
● The communication between the PG/PC and drive system has been prepared.
● The power supply of the Control Unit (24 V DC) has been switched on.
3.6.1

Task

A drive in the "booksize" format with "V/f vector control" control mode with the following
components is to be commissioned for the first time:
Table 3- 3
Designation
Closed-loop control and infeed
Control Unit
Smart Line Module
Line filter package 16 kW
Drive 1
Single Motor Module 1
Motor 1
Drive 2
Single Motor Module 2
Motor 2
The enable signals for the infeed and the drive should be implemented via terminals.
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5
3.6 Commissioning U/f vector control booksize format for the first time
Component overview
Component
Control Unit 320-2 DP
Smart Line Module 16 kW
Line filter and line reactor
Single Motor Module 9 A
Induction motor
Single Motor Module 9 A
Induction motor
Commissioning
Article number
6SL3040-1MA00-0AA0
6SL3130-6TE21-6A..
6SL3100-0BE21-6AB0
6SL3120-1TE21-0A..
1PH8083-1.F2.-....
6SL3120-1TE21-0A..
1PH8083-1.F2.-....
133