Temperature Sensors For Sinamics Components - Siemens Sinamics s120 Commissioning Manual

Commissioning

3.21 Temperature sensors for SINAMICS components

3.21 Temperature sensors for SINAMICS components
Danger to life due to electric shock in the event of voltage flashovers on the temperature
sensor cable
Voltage flashovers to the signal electronics can occur in motors without safe electrical
separation of the temperature sensors.
• Use temperature sensors that satisfy the specifications of the protective separation in
• If protective separation cannot be guaranteed (with linear motors or third-party motors,
The following table provides an overview of the SINAMICS drive system components
available with temperature sensor connections.
Table 3- 27 Temperature sensor connections for SINAMICS components
Module
SMC10/SMC20
SMC30
CU310-2 DP
CU310-2 PN
CUA31
CUA32
TM31
282
WARNING
accordance with IEC 61800-5-1.
for example), use a Sensor Module External (SME120 or SME125) or the TM120
Terminal Module.
Interface Pin
X520 (sub D) 13
25
X520 (sub D) 1
Temperature chan- 8
nel 2
X531 (terminal) 3
Temperature chan- 4
nel 1
X23 (sub D) 1
8
X120 (terminal) 1
2
X210 (terminal) 1
2
X210 (terminal) 1
Temperature chan- 2
nel 2
X220 (sub D) 1
Temperature chan- 8
nel 1
X522 (terminal) 7
8
Signal name Technical specifications
+Temp Temperature sensor
-Temp KTY84-1C130/PTC/PT1000
+Temp Temperature sensor
-Temp KTY84-
1C130/PTC/PT1000/bimetallic
switch with NC contact
-Temp Temperature sensor
+Temp KTY84-
1C130/PTC/PT1000/bimetallic
switch with NC contact
+Temp Temperature sensor
-Temp KTY84-1C130 /PTC/PT1000
+Temp Temperature sensor
-Temp KTY84-1C130/PTC/PT1000
+Temp Temperature sensor
-Temp KTY84-1C130/PTC/PT1000
+Temp Temperature sensor
-Temp KTY84-
1C130/PTC/PT1000/bimetallic
switch with NC contact
+Temp Temperature sensor
-Temp KTY84-
1C130/PTC/PT1000/bimetallic
switch with NC contact
+Temp Temperature sensor
-Temp KTY84-1C130/PTC/PT1000
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5
STARTER Commissioning Manual