Voltage Sensing Module Vsm10; Drive-Cliq Hub Module Dmc20 - Siemens Sinamics s120 Commissioning Manual

Diagnostics
4.1 Diagnostics via LEDs
4.1.3.8

Voltage Sensing Module VSM10

Table 4- 44 Meanings of the LEDs on the Voltage Sensing Module VSM10
LED Color Status
READY – Off
Green Continuous
light
Orange Continuous
light
Red Continuous
light
Green/red Flashing
light 0.5 Hz
Flashing
light 2 Hz
Green/ Flashing
orange light
or
Red/
orange
4.1.3.9

DRIVE-CLiQ Hub Module DMC20

Table 4- 45 Description of the LEDs on the DRIVE-CLiQ Hub Module DMC20
LED Color Status
READY – Off
Green Continuous
light
Orange Continuous
light
Red Continuous
light
Green/red Flashing
light 0.5 Hz
Flashing
light 2 Hz
334
Description, cause
The electronics power supply is missing or outside the per-
missible tolerance range.
The component is ready for operation. Cyclic DRIVE-CLiQ
communication is taking place.
DRIVE-CLiQ communication is being established.
This component has at least one fault.
Note:
LED is controlled irrespective of the corresponding messag-
es being reconfigured.
Firmware is being downloaded.
Firmware download is complete. The system waits for
POWER ON.
Detection of the component via LED is activated (p0144 =
1).
Note:
Both options depend on the LED status when component
recognition is activated.
Description, cause
The electronics power supply is missing or outside the per-
missible tolerance range.
The component is ready for operation. Cyclic DRIVE-CLiQ
communication is taking place.
DRIVE-CLiQ communication is being established.
This component has at least one fault.
Note:
LED is controlled irrespective of the corresponding messag-
es being reconfigured.
Firmware is being downloaded.
Firmware download is complete. The system waits for
POWER ON.
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5
Remedy
–
–
–
Remove and
acknowledge the fault.
–
Carry out a POWER
ON.
–
Remedy
–
–
–
Remove and
acknowledge the fault.
–
Carry out a POWER
ON.