Siemens Sinamics s120 Commissioning Manual page 110

With starter

Hide thumbs Also See for Sinamics s120:

Table of Contents

Commissioning

3.3 STARTER commissioning tool

Setting the interface in the STARTER commissioning tool

In the STARTER commissioning tool, you set communication via PROFINET as follows:

1. Call the menu "Tools > Set PG/PC interface ...".

2. Select the "Access point of the application", and therefore the interface parameter

assignment (in the example we use the access point "S7ONLINE (STEP 7)" and the

interface parameterization "TCP/IP(Auto)->Belkin F5D 5055").

If the desired interface does not yet exist in the selection list, you can create it.

Setting the PG/PC interface

STARTER Commissioning Manual

Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5