Important Functions In The Starter Commissioning Tool; Restoring The Factory Settings - Siemens Sinamics s120 Commissioning Manual

3.3.2

Important functions in the STARTER commissioning tool

The STARTER commissioning tool offers the following functions to support the project
handling:
● Restoring the factory settings
● Various operating wizards
● Configuring and parameterizing drives
● A virtual control panel to rotate the motors
● Run trace functions for controller optimization of the drives
● Create and copy data records
● Load the project from the programming device to the target device
● Copy volatile data from RAM to ROM
● Load the project from the target device to the programming device
● Create and activate safety functions
● Activate write protection
● Activate know-how protection
The programming device is called "PG/PC" in the subsequent text. The Control Unit of the
SINAMICS drive system is called the "Target device".
Operating support using wizards
Wizards are integrated in STARTER for various functions to support operation.
3.3.2.1

Restoring the factory settings

You can use this function to set all the parameters in the working memory of the Control Unit
to the factory settings. To ensure that the data on the memory card is also reset to the
factory settings, choose the "Copy from RAM to ROM" function. This function can only be
activated in the online mode. To activate the function:
1. Call the shortcut menu "Drive unit > Target device > Restore factory settings".
In the following prompt window you can select as to whether you also wish to save the
factory setting in the ROM.
2. Click "OK" to acknowledge.
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5
Commissioning
3.3 STARTER commissioning tool
95