Commissioning
3.4 Creating a project in the STARTER commissioning tool
Insert drives
The nodes are shown here in the preview.
Use the button "Refresh view" to update the preview.
1. Click "Continue >".
Summary
You have now created the project. The project wizard shows the current settings.
1. Click "Finish".
Configure the drive unit
Once you have created the project, you have to configure the drive unit. Some examples are
provided in the following Chapters.
122
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5